Menu

NTC Simulator 

RM10-NTC

RM10-NTC-1

Specifications

NTC simulator  （Resistors simulator）

  • 4/8/12/16 Channels.
  • 0-1Mohm resistance simulation range.
  • 1ohm / 10ohm step.
  • The voltage range of each channel is ±40V.
  • The current range of each channel ±100mA， with over current protection.  The precision of the resistor is 0.5%FS.
  • The minimum dynamic response time of one channel is ≤1ms.
  • The board is controllable by Ethernet TCP/USB-C/CAN ISO 11898-2.

NTC Simulator 

RM10-NTC

RM10-NTC-1

Specifications

NTC simulator  （Resistors simulator）

  • 4/8/12/16 Channels.
  • 0-1Mohm resistance simulation range.
  • 1ohm / 10ohm step.
  • The voltage range of each channel is ±40V.
  • The current range of each channel ±100mA， with over current protection.  The precision of the resistor is 0.5%FS.
  • The minimum dynamic response time of one channel is ≤1ms.
  • The board is controllable by Ethernet TCP/USB-C/CAN ISO 11898-2.

APPLICATION

  • New  Energy  Vehicle/Drone/Energy Storage  BMS  (Battery Management System), CMS (Capacity Management System).
  • Battery Protection Board Testing
  • Battery maintenance equipment testing
Application
back
back