Cell Simulator
10/20/30/40/50
The Cells Simulation Board (EM_ALCS LM AC) is a battery simulator board used to simulate battery features. This board contains 6 isolated cells that can be controlled or adjusted by software via CAN ISO 11898-2. A single board can be used or several in series according to the requirements (based on how many cells are needed).
The voltage of each cell can be controlled with the software, also the voltage and current for each cell can be measured with the software.
Specifications
6 channel cell simulator card
- Cells Simulation Board with 6 independent cells in total.
- Extendable number of cells by adding more boards.
- Each cell has adjusted output voltage (0-7V) and resolution of 0.5mV/1mV/5mV.
- The current sourcing of each cell is in the range 0 – 1A or 0 – 1.5A.
- Option of Voltage and current of each cell can independently be measured with isolated differential measurements at 400uV and 5uA precision.
- Instant or average measurement.
- The board is controllable by Ethernet TCP/USB-
- C/CAN ISO 11898-2.
- Option of quiescent current reading.
Cell Simulator
10/20/30/40/50
The Cells Simulation Board (EM_ALCS LM AC) is a battery simulator board used to simulate battery features. This board contains 6 isolated cells that can be controlled or adjusted by software via CAN ISO 11898-2. A single board can be used or several in series according to the requirements (based on how many cells are needed).
The voltage of each cell can be controlled with the software, also the voltage and current for each cell can be measured with the software.
Specifications
6 channel cell simulator card
- Cells Simulation Board with 6 independent cells in total.
- Extendable number of cells by adding more boards.
- Each cell has adjusted output voltage (0-7V) and resolution of 0.5mV/1mV/5mV.
- The current sourcing of each cell is in the range 0 – 1A or 0 – 1.5A.
- Option of Voltage and current of each cell can indepently be measured with isolated differential measurements at 400uV and 5uA precision.
- Instant or average measurement.
- The board is controllable by Ethernet TCP/USB-
- C/CAN ISO 11898-2.
- Option of quiescent current reading.
APPLICATION
- Sensor Data Acquisition
- Industrial Measurement and Control
- Oscilloscope mode testing